Full articles in refereed publications
1. Xi. JQ., and M. Li, 2014, “Optimal Energy Management Strategy for Battery Powered Electric Vehicles,” Applied Energy, Vol. 134, pp. 332-341.
2. Cheng,S.,and M. Li, 2014, “Robust Optimization Using Hybrid Differential Evolution and Sequential Quadratic Programming,” Engineering Optimization (forthcoming).
3. Wang, J., and M. Li, 2014, “Optimal Redundancy Allocation for Systems with Failure Interactions using Modified Analytic Hierarchy Process”, Journal of Mechanical Design(accepted with revision).
4. Cheng,S., JH. Zhou,and M. Li, 2014, “A New Hybrid Algorithm for Multi-Objective Robust Optimization with Interval Uncertainty,” Journal of Mechanical Design(accepted with revision).
5. Yin, H., C. Zhao, M. Li and CB. Ma, 2014 “Utility Function-Based Real-Time Control of A Battery-Ultracapacitor Hybrid Energy System,” IEEE Transactions on Industrial Informatics (acceptedwith revision).
6. Wang, XD.,PF. Huang, J. Xie,and M. Li, 2013, “OFDMA-Based Channel-Width Adaptation in Wireless Mesh Networks”, IEEE Transactions on Vehicular Technology, DOI: 10.1109/TVT.2014.2308316.
7. Zhou, JH., and M. Li, 2013, “Advanced Robust Optimization with Interval uncertainty Using a Single-looped Structure and Sequential Quadratic Programming”, Journal of Mechanical Design, 136(2), 021008/1 – 021008/11.
8. Zhou, JH., S. Cheng, M. Li, 2012, “Sequential Quadratic Programming for Robust Optimization with Interval Uncertainty”, Journal of Mechanical Design, 134(10), 100913/1 – 100913/13.
9. Zhao, JX., M. Xu, M. Li, B. Wang, SZ. Liu, 2012, “Design andOptimization of an Atkinson Cycle Engine with the Artificial Neural Network Method,” Applied Energy, Vol.92, pp. 492-502.
10. Li, M., 2011, “An Improved Kriging Assistant Multi-Objective Genetic Algorithm,” Journal of Mechanical Design, Vol.133, No. 7, 071008/1 – 071008/10.
11. Li, M., S. Gabriel, Y. Shim, and S. Azarm, 2011, “Robust Optimization Using Worst Case Analysis for Convex and Non-Convex Quadratic Programs,” Networks and Spatial Economics, 11, pp.159–191.
12. Hu, W., M. Li, S. Azarm, S. Al Hashimi, A. Almansoori, and N. Al Qasas, 2011, “On Improving Multi-Objective Robust Optimization under Interval Uncertainty Using Worst Possible Point Constraint Cuts,” Journal of Mechanical Design, Vol.133, No. 6, 061002/1 – 061002/9.
13. Hamel, J., M. Li, S. Azarm, 2010, “Design Improvement by Sensitivity Analysis (DISA) Under Interval Uncertainty Using Multi-Objective Optimization,” Journal of Mechanical Design, Vol. 132, No.8, 081010/1- 081010/10.
14. Li, M., J. Hamel and S. Azarm, 2010, “Multi-Disciplinary Multi-Output Global Sensitivity Analysis with Reducible Interval Uncertainty,” Structural and Multidisciplinary Optimization, Vol. 40, No.1-6, pp.77-86.
15. Li, M., S. Azarm, N. Williams, S. Al Hashimi, A. Almansoori, and N. Al Qasas, 2009, “Integrated Multi-Objective Robust Optimization and Sensitivity Analysis with Irreducible and Reducible Interval Uncertainty,” Engineering Optimization, Vol.41, No.10, 889-908.
16. Li, M., N. Williams and S. Azarm, 2009, “Interval Uncertainty Reduction and Sensitivity Analysis with Multi-Objective Design Optimization,” Journal of Mechanical Design, Vol. 131, No.3, 031007/1 – 031007/11.
17. Li, G., M. Li, S. Azarm, N. Al Qasas, T. Al Ameri, and S. Al Hashimi, 2009, “Improving Multi-Objective Genetic Algorithms with Adaptive Design of Experiments and Online Metamodeling,” Structural and Multidisciplinary Optimization, Vol. 37, No. 5, pp. 447-461.
18. Li, M., and S. Azarm, 2008, “Multiobjective collaborative Robust Optimization (McRO) with Interval Uncertainty and Interdisciplinary Uncertainty Propagation,”Journal of Mechanical Design, Vol. 130, No.8, 081402/1– 081402/11.
19. Li, M., G. Li and S. Azarm, 2008, “A Kriging Metamodel Assisted Multi-objective Genetic Algorithm for Design Optimization,” Journal of Mechanical Design, Vol. 130, No.3, 031401/1– 031401/10.
20. Li, G., M. Li, S. Azarm, J. Rambo, Y. Joshi, 2007, “Optimizing thermal design of data center cabinets with a new multi-objective genetic algorithm,” Distributed and Parallel Databases, Vol. 21, No. 2-3, pp.167-192.
21. Li, M., S. Azarm, and A. Boyars, 2006, “A New Deterministic Approach Using Sensitivity Region Measures for Multi-objective Robust and Feasibility Robust Design Optimization,” Journal of Mechanical Design, Vol. 128, No.4, pp. 874-883.
Shorter communications, letters or notes or briefs in refereed publications
1. Xi. JQ.,Q. Zhang, M. Li and ZG. Wang, 2014, “Advanced Flow Control for Supersonic Blow-down Wind Tunnel Using Extended Kalman Filter”, Journal of Dynamic Systems, Measurement, and Control,Vol. 137, No.1, pp. 014501-014501-6 (6 page technical brief)
Refereed conference or symposium proceedings paper
1. Wang, J.,and M. Li,2014, “Improve System Reliability and Robustness Using Axiomatic Design and Fault Tree Analysis”,IDETC/CIE 2014, ASME 2014International Design Engineering Technical Conferences &Computers and Information in Engineering Conference, Aug. 17-20, Buffalo, NY, USA.
2. Wang, J.,and M. Li,2014, “Redundancy Allocation for Reliability Design of Engineering Systems with Failure Interactions”,IDETC/CIE 2014, ASME 2014International Design Engineering Technical Conferences &Computers and Information in Engineering Conference, Aug. 17-20, Buffalo, NY, USA.
3. Zhou, WH., M. Li, Y. He,and CB. Ma, 2014, “An Adaptive Fuzzy Logic Based Energy Management Strategy for Electric Vehicles”, ISIE 2014, International Symposium on Industrial Electronics, June 1-4, Istanbul, Turkey.
4. Yin, H., C. Zhao, M. Li and CB. Ma, 2013, “Optimization Based Energy Control for Battery/Super-capacitor Hybrid Energy Storage Systems”,IECON2013, 39th Annual Conference of the IEEE Industrial Electronics Society, Nov. 10-13, Vienna, Austria.
5. Xi, JQ., Q. Zhang, M. Li and ZG. Wang, 2013, “Advanced Flow Control for Supersonic Blowdown Wind Tunnel Using Extended Kalman Filter”,GT2013, ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA.
6. Zhou, JH., and M. Li, 2013, “Advanced Robust Optimization Approach for Design Optimization with Interval Uncertainty Using Sequential Quadratic Programming”,IDETC/CIE 2013, ASME 2013 International Design Engineering Technical Conferences &Computers and Information in Engineering Conference, Aug. 4-7, Portland, Oregon, USA.
7. Cheng, S., and M. Li, 2013, “Multi-Objective Robust Optimization Using Differential Evolution and Sequential Quadratic Programming”,IDETC/CIE 2013, ASME 2013 International Design Engineering Technical Conferences &Computers and Information in Engineering Conference, Aug. 4-7, Portland, Oregon, USA.
8. Wang, B., M. Li, M. Xu, 2012, “Energy-Based Modeling and Optimization for Energy Economy of Electric Vehicles”,FISITA2012, November 27-30, Beijing, China.
9. Zhou, JH., S. Cheng, M. Li, 2012, “Sequential Quadratic Programming for Robust Optimization with Interval Uncertainty”,IDETC/CIE 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Aug.12-15, Chicago, Illinois, USA.
10. Liu, X., M. Li, C. Ma, M. Xu, 2012, “Kriging Assisted On-line Torque Calculation for Brushless DC Motors Used in Electric Vehicles”,21th IEEE International Symposium on Industrial Electronics, ISIE 2012, May 28-31, Hangzhou, China.
11. Liu, X., C. Ma, M. Li, M. Xu, 2011, “A Kriging Assisted Direct Torque Control of Brushless DC Motor for Electric Vehicles”,ICNC 2011, 7th International Conference on Natural Computation, v3, pp. 1705-1710, July 26-28, Shanghai, China.
12. Li, M., 2010, “An Improved Kriging Assistant Multi-Objective Genetic Algorithm,” IDETC/CIE 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.
13. Li, M., N. Williams and S. Azarm, 2009, “Interval Uncertainty Reduction and Sensitivity Analysis with Multi-Objective Design Optimization,” IDETC/CIE 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 30 – September 2, San Diego, California, USA.
14. Hamel, J., M. Li, and S. Azarm, 2009, “A Sensitivity Analysis Based Approach to Ensure Design Feasibility under Interval Uncertainty,” IDETC/CIE 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 30 – September 2, San Diego, California, USA.
15. Hu, W., M. Li, S. Azarm, S. Al Hashimi, A. Almansoori, and N. Al Qasas, 2009, “On Improving Multi-Objective Robust Optimization under Interval Uncertainty Using Worst Possible Point Constraint Cuts,” IDETC/CIE 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 30 – September 2, San Diego, California, USA.
16. Li, M., J. Hamel, and S. Azarm, 2008, “Multi-Disciplinary Multi-Objective Sensitivity Analysis (MIMOSA) with Interval Parameter Uncertainty,” 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, September 10-12, Victoria, British Columbia, Canada.
17. Li, M., and S. Azarm, 2007, “Multiobjective collaborative Robust Optimization (McRO) with Interval Uncertainty and Interdisciplinary Uncertainty Propagation,”Proceedings of IDETC/CIE 2007, ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 4-7, Las Vegas, Nevada, USA.
18. Li, M., G. Li and S. Azarm, 2006,“A Kriging Metamodel Assisted Multi-objective Genetic Algorithm for Design Optimization,” Proceedings of IDETC/CIE 2006, ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 10-13, Philadelphia, Pennsylvania,USA.
19. Li, M., S. Azarm, and A. Boyars, 2005, “A New Deterministic Approach Using Sensitivity Region Measures for Multi-objective Robust and Feasibility Robust Design Optimization,” Proceedings of IDETC/CIE 2005, ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 24-28, Long Beach, California,USA.
20. Li, M., S. Azarm, and V. Aute, 2005, “A Multi-Objective Genetic Algorithm for Robust Design Optimization,” Genetic and Evolutionary Computation Conference (GECCO) ’05, June 25-29, Washington DC, USA.
Refereed conference summaries or abstracts
1. Wang, J.,WH. Zhou,and M. Li, 2013, “Reliability Study on Control Methods for Hybrid Energy Storage Systems,”APCOM2013, 5th Asia Pacific Congress on Computational Mechanics & 4th International Symposium on Computational Mechanics, Dec. 11-14, Singapore.
2. Cheng, S., JH. Zhou, M. Li, 2012, “Differential Evolution and SQP for Optimization with Interval Uncertainty,”INFORMS Beijing 2012, June 24-27, Beijing, China.
3. Li, M., J. Hamel, S. Azarm, C. Tseng, Y. T. Lee, 2009, “A Matlab Based Software Tool for Multi-Objective Robust Optimization and Sensitivity Analysis: A Case Study for Undersea Propulsion System Design,”8th World Congress on Structural and Multidisciplinary Optimization, June 1-5, Lisbon, Portugal.
4. Azarm, S., and M. Li, 2005, “Multi-objective Robust Design Optimization: Parameter vs. Performance Sensitivity,”6th World Congress on Structural and Multidisciplinary Optimization, May 30-June 3, Rio de Janeiro, Brazil.
Journal paper in Chinese
1.龚华，许敏，李冕，袁志远，秦际宏，杨晓, 2014,“提高发动机性能一致性的公差优化,” 内燃机工程(EI index, published online, http://www.cnki.net/kcms/detail/31.1255.TK.20140116.1103.014.html）
2.钟明明，许敏，李冕，王森，林观生, 2012, “发动机制造精度与性能关系研究[J].” 机械制造与自动化
3.邱宇，许敏，李冕，2012, “基于多体动力学的发动机主轴承润滑特性Kriging建模研究,” 机械设计与研究
4.李明，许敏，赵金星，徐宏昌，李冕，2011,“基于GT-Power仿真的2.0L汽油机动力性能分析与优化,”汽车技术, 3,pp.5-11.